Product
New Product
This is our new design type which is for the professional makeup. With the hose, airbrush holder , plug, compressor, airbrush together in 1 set. Also with different color for the optional.
It also features a cut-away style handle so that any minor clogging of the nozzle can be rapidly cleared by moving the needle forward and back, and a precise adjustable needle stop to regulate line thickness/paint flow.
Particularly suitable for detail design work. It is of all metal construction. For Model Painting, Body Art, Hobby and Craft, Fine Art, Car painting, Photo Retouching, Illustrations, Textiles and T-shirt painting. It\'s the perfect kit for facial makeup.
The use of Airbrush Compressor.
Correct debugging gun tail compressed air inlet pressure
From Italy's colour with CARDS, for example, such as, the guinness book of HTE (GEO), only need guns, 2.0-2.5 and pressure can be enough to best atomization effect.
Spray distances
In order to avoid overspray and spraying result is bad, by spraying type and coating workpieces with gas cap decision. If the guinness book of HTE (GEO), the best spray gun for 20cm distance.
Spray velocity
Due to the different gun type, coating spray painting viscosity, pressure, and spray distances requirements are different, spray velocity is not the same. In the guinness book of HTE (for example: such as guns) for 15-17s viscosity, pneumatic spray painting for 2.5, open and distance for 20cm for. So the best painting speed for 80-100 per cm, according to the above data moving operation of atomization effect spray is the best and most province makings.
Spray painting overlap
Spray painting in spraying overlap is: flat for 2/1 overlap spray. For 3 1/2 wet-spray overlap.
Spraying Angle
Spray gun and workpiece when, should maintain 90 º. Also is the workpiece and spray gun needle should keep vertical 90 º.
After cleaning
After each use guns must promptly cleaned, don't take long soak in thinners guns in, this would make the sealing ring, spray gun aging damage. At the same time, should pay attention to the disassembly sequence, nozzle should be removed, open air thimble, then open lips gun. When installed in inverse order. After cleaning the activities in the gun position plus adequate special lubricants guns.
Nozzle suit
Replace nozzle, usually a suit with the same type of gun. Set includes nozzle, inspection of spray nozzle needle components, gas cap. Gas cap should put in its place on the mark. Only the original parts to ensure the highest quality and service life.
Horsepower:1/8HP (92W)
Airflow:16LPM
Speed:1720RPM
N.W.:4KG(8.8LB)
L*W*H:285*155*215mm
Outlet size:1/8"
Annex:Coil Hose (or other types optional)
Remark:Diaphragm type without antomatic stop function
Contact Information：
Tel: 0086-574-88657102
Fax: 0086-574-88652339
E-mail: info@tagoreairbrush.com
Online MSN: airtool@live.com
Online Skype: airtool@live.com
Online Yahoo Messager: cubeofrubik.star
Web Site: www.tagoreairbrush.com
For Product Information,Please Contact Us
